This M8 clamping kit for the Equator gauging system can be used to hold brass, titanium, aluminium, plastic, ferrous and non-ferrous parts. It includes: an advanced component set, and an Equator kinematic base plate with M8 threaded holes spaced at 15 mm intervals.
| Part Number | Description | Quantity |
|---|---|---|
| R-M-13-8 | Ø 13 mm × 25 mm magnet | 4 |
| R-M-19-8 | Ø 19 mm × 25 mm magnet | 4 |
| R-M-25-8 | Ø 25 mm × 25 mm magnet | 4 |
| R-MP-13-8 | Ø 13 mm × 25 mm magnet | 2 |
| R-S-1315-8 | Ø 13 mm × 15 mm standoff | 3 |
| R-S-1320-8 | Ø 13 mm × 20 mm standoff | 6 |
| R-S-1325-8 | Ø 13 mm × 25 mm standoff | 6 |
| R-S-1350-8 | Ø 13 mm × 50 mm standoff | 6 |
| R-S-1915-8 | Ø 19 mm × 15 mm standoff | 3 |
| R-S-1920-8 | Ø 19 mm × 20 mm standoff | 6 |
| R-S-1925-8 | Ø 19 mm × 25 mm standoff | 6 |
| R-S-1950-8 | Ø 19 mm × 50 mm standoff | 6 |
| R-S-19100-8 | Ø 19 mm × 100 mm standoff | 4 |
| R-S-2520-8 | Ø 25 mm × 20 mm standoff | 6 |
| R-S-2525-8 | Ø 25 mm × 25 mm standoff | 6 |
| R-S-2550-8 | Ø 25 mm × 50 mm standoff | 6 |
| R-S-25100-8 | Ø 25 mm × 100 mm standoff | 4 |
| R-CT-40-30-8 | 40 mm tension clamp with 30 mm post and M8 thread | 4 |
| R-CT-64-70-8 | 63.5 mm tension clamp with 68 mm post and M8 thread | 8 |
| R-RCD-8 | Delrin® resting cone with M8 thread | 4 |
| R-RCS-8 | Steel resting cone with M8 thread | 4 |
| R-AJ-19-8 | Ø 19 mm adjustable jack stand with M8 thread | 2 |
| R-AJ-25-8 | Ø 25 mm adjustable jack stand with M8 thread | 2 |
| R-AS-45-8 | 44 mm long adjustable slide with M8 thread | 1 |
| R-AS-70-8 | 72 mm long adjustable slide with M8 thread | 3 |
| R-TB-2530-8 | 25 mm² × 89 mm tower block with base and M8 thread | 2 |
| R-TC-500200 | 500 mm × 200 mm × 25 mm component tray to hold M6 and M8 components | 1 |
| R-BC10 | 50 mm × 200 mm × 150 mm compartment box (not shown) | 1 |
