This M6 CMM magnetic and clamping kit is particularly useful for holding ferrous workpieces, but can also be used to hold brass, titanium, aluminium, plastic and non-ferrous parts. It includes: an advanced component set and a 750 mm × 1000 mm base plate with M6 threaded holes spaced at 12.5 mm intervals.
Plate clamps (R-CPC-190) are not included but can be purchased separately to mount the base plate to the CMM.
Part Number | Description | Quantity |
---|---|---|
R-M-13-6 | Ø 13 mm × 25 mm magnet | 4 |
R-M-19-6 | Ø 19 mm × 25 mm magnet | 4 |
R-M-25-6 | Ø 25 mm × 25 mm magnet | 4 |
R-MP-13-6 | Ø 13 mm × 25 mm pin magnet | 2 |
R-S-910-6 | Ø 9 mm × 10 mm standoff | 3 |
R-S-1320-6 | Ø 13 mm × 20 mm standoff | 6 |
R-S-1325-6 | Ø 13 mm × 25 mm standoff | 6 |
R-S-1350-6 | Ø 13 mm × 50 mm standoff | 6 |
R-S-1910-6 | Ø 19 mm × 10 mm standoff | 3 |
R-S-1920-6 | Ø 19 mm × 20 mm standoff | 6 |
R-S-1925-6 | Ø 19 mm × 25 mm standoff | 6 |
R-S-1950-6 | Ø 19 mm × 50 mm standoff | 6 |
R-S-19100-6 | Ø 19 mm × 100 mm standoff | 3 |
R-S-2520-6 | Ø 25 mm × 20 mm standoff | 6 |
R-S-2525-6 | Ø 25 mm × 25 mm standoff | 6 |
R-S-2550-6 | Ø 25 mm × 50 mm standoff | 6 |
R-S-25100-6 | Ø 25 mm × 100 mm standoff | 3 |
R-CT-40-30-6 | 40 mm tension clamp with 30 mm post with M6 thread | 4 |
R-CT-64-70-6 | 64 mm tension clamp with 70 mm post with M6 thread | 8 |
R-RCD-6 | Delrin® resting cone with M6 thread | 4 |
R-RPS-6 | Steel resting pin with M6 thread | 4 |
R-AJ-13-6 | Ø 13 mm adjustable jack stand with M6 thread | 2 |
R-AJ-25-6 | Ø 25 mm adjustable jack stand with M6 thread | 2 |
R-AS-45-6 | Ø 45 mm long adjustable slide with M6 thread | 2 |
R-AS-70-6 | 70 mm long adjustable slide with M6 thread | 2 |
R-TB-2025-6 | M6 tower block with base 20 mm sq. × 30 mm | 2 |
R-TC-500200 | 500 mm × 200 mm × 25 mm component tray to hold M6 and M8 components | 1 |
R-BC10 | 50 mm × 200 mm × 150 mm compartment box (not shown) | 1 |