This essential 1/4-20 magnetic and clamping kit is particularly useful for holding ferrous workpieces, but can also be used to hold brass, titanium, aluminium, plastic and non-ferrous parts. It is recommended for use on CMMs and Equator systems.
Replacement for old R&R part number: FSC-MCA-20
| Part Numbers | Description | Quantity |
|---|---|---|
| R-M-50-20 | 0.50 in dia. × 1.0 in magnet | 3 |
| R-M-75-20 | 0.75 in dia. × 1.0 in magnet | 3 |
| R-M-1-20 | 1.0 in dia. × 1.0 in magnet | 3 |
| R-S-5075-20 | 0.50 in dia. × 0.75 in standoff | 3 |
| R-S-501-20 | 0.50 in dia. × 1.0 in standoff | 3 |
| R-S-502-20 | 0.50 in dia. × 2.0 in standoff | 3 |
| R-S-7575-20 | 0.75 in dia. × 0.75 in standoff | 3 |
| R-S-751-20 | 0.75 in dia. × 1.0 in standoff | 3 |
| R-S-752-20 | 0.75 in dia. × 2.0 in standoff | 3 |
| R-S-175-20 | 1.0 in dia. × 0.75 in standoff | 3 |
| R-S-11-20 | 1.0 in dia. × 1.0 in standoff | 3 |
| R-S-12-20 | 1.0 in dia. × 2.0 in standoff | 3 |
| R-CT-250-275-20 | 2.5 in tension clamp with 2.75 in post | 4 |
| R-RCD-20 | Delrin® resting cone | 3 |
| R-AJ-50-20 | 0.50 in dia. adjustable jackstand | 1 |
| R-AS-1-20 | 1.0 in long adjustable slide | 1 |
| R-AS-3-20 | 3.0 in long adjustable slide | 1 |
| R-TC-500200 | 20 in × 8 in × 1 in component tray | 1 |
| R-BC-10 | 8 in × 8 in × 2 in compartment box (not shown) | 1 |
